PLB101SS Universal 26″-37″ LCD TV Wall Mount Bracket Tilt 70Kg Samsung LE32A436T Sony KDL-32V4000 Philips 32PFL5522D LG 26LG3000 32LG3000
£19.98
Product Description
PLB101S is a heavy duty wall mount TV bracket, suitable for 98% of 26″-37″ LCD TVs in the market. Q: How do I choose the right size wall mount bracket for my LCD/Plasma TV? Is this TV Bracket compatible with my TV? A: Check the back of your TV and find the four threaded holes (if there is no threaded holes or less then four holes, then the TV is not classified as wall-mountable); Measure the horizontal and vertical distances between them (in mm); for example, horizontal = 400mm vertical =200mm; Select a bracket whose supported max. mounting-hole pattern is larger than one you have just measured; but its overall size should be smaller than the TV otherwise the bracket will be stickout from the back of the TV; You might also want to check whether the TV connections/ports is facing backward or not, if yes then do NOT select super slim wall brackets like PLB104 and PLB105 series because you might have great difficulties to get the cables into the slim space between the TV and wall. Don’t just look at the TV sizes mentioned on the item title, it is only for general references. Want the TV to be very close to the wall? try the super-slim bracket PLB105S (not suitable for TVs with connection ports facing backward toward wall, otherwise it will be difficult to connect the SCART cables) Want to install the TV in the corner? try the Swivel & Tilting bracket PLB109S
This wall Bracket is very sturdy, but it does have a couple of issues you should be aware of before purchase; Firstly the fitting kit is imperial so won’t fit U. K drill bits, this is easily solved by a trip to Homebase to buy metric versions of the wall bolts (£3. 99 for five – the kit comes with six); secondly the bottom of the hanging bracket is secured with a fitted bolt, on my bracket the bottom of the arm was not at right angles to the vertical section (a manufacturing flaw ? or just on the wall bracket I was sent?)making it impossible to fully tighten the bolt. Still overall the bracket holds my Sony KDL32V2000 securely to the wall and at just under £20 (+ £4 for the right bolts) is £176 cheaper than the genuine Sony item !
I have two of these now one holding a 26″ the other holding a 32″ samsung, even tho the screws are imperial you can still tighten it fully yo the wall using a size 13 spanner or 1/2 af i think i used. Both tv brackets have been there for 2/3 months now =) You have about 2 inchs of space at the back to get your wires which you shouldnet need more then. When tighting the screws at the bottom it is also fine, so guess they other dude got a duff model
lol /touchwood. Thhe tilting on it is great 
Overall a great product
This is a great product. Comes with more screws, spacers and washers than you need for a single TV and 4 of these were the correct size for TV. Came with 3 different spacers (width and length) however none of these were suitable for the Sony KDL32V4000 so put it on without them. Requires the drilling of at least 4 substantial holes (9mm) so if fitting onto brick will require a decent drill. Swivel adjustment easy to operate and strong enough to hold TV in position.